Will a 1995 4l60e work as a swap for a 1997 4l60e?

Yes it will

Sorry there Auto Adrenaline, that trany will not work in the 97' because of the computers. 1995 is controlled with a OBD1 computer and the 1997 trany is controlled by a OBDII computer.

I thought the OBDII was not implemented until 1998?

1996 is when the OBDII computers were put into vehicles.

I should have known that. Just finished work on a 1995 5.0 Mustang GT that was an OBD1 car, and we have a 1996 GT in the shop that is OBDII. I should have finished my coffee before posting apparently. I apologize OP.

Ok ,so the years that are interchangable with my 1997 are; 1996,1997 and 1998? Any more later years?

I've personally put a 95 4l60e into a 97 c1500 pick up. The only issue I had was the pan that goes under the torque converter had lip on it that wouldn't clear the the flywheel so I cut it off with a grinder. It shifted beautifully all the way to 120mph on a regular basis.

Will a 96 work in a 95 chevy 4l60e transmission

What all years of 4l60e will go in my 1995 chevrolet c1500 2wd

93-95 all have different style bell housings

@GuruCKLRS Bell housing will still fit GM only changed the bell housing when they introduced the ls and even then all they did was add the top center bolt. Im running TH400 on my 6.0.

I have a 2wd 4l60e trans out of a 94. I need 97 4wd

I have a 4L60E for a 4 wheel drive , it has a removable bell housing and a 6 bolt transfer case connection. Bought it to swap mine out but was wrong , mechanic took to long and I was unable to return. If it will work for you let me know. However it is an extra cab truck.

Would you trade plus ill add cash

If you mean trade for the trans you have , no , have no need after rebuilding mine.

GuruL928H, how much for your trans? I need a 97 4x4 extended cab that's in good running order...

I've got $400 in it , make an offer , was told it had 109K and was good to go , came with factory torque converter. Make sure yours has the removable bell housing and six bolt transfer case connection otherwise you'll need to replace a few parts to make it work.

bell housing

transfer case connection

torque converter

fits 5.7L

If your looking for someone to buy that 95 4l60e i need one for my truck

i have a 97 4l60 4x4 need to know whatbyears are interchangeable

My understanding from dealing with my 97 4x4 extra cab is only 1996 , 1997 and 1998 will work.

I need a transmission for my 95 suburban 4x4 c1500 what year are compatible ?

Will a 1995 2wd swap to a 1996 4x4

I have a 95 4l60e 2wd for sale if anyone is interested.

I have a 95 4L60E if anybody wants it

Looking for a 95 4l60e,pwm transmission. Ship to oregon????

Will a 1999 4×4 fit a 1996 chevy truck 4×4 tranny

Looking for a 95 model 4x4 transmission it has to be a 95 model thanks

GuruRYPQN I have one I just pulled out of a 95 tahoe if you still need one

Guru6R8XW I need one. How much?

Bbody9596 200$

@tony your truck must have a tuner on it in order to hit 120...

Guru6R8XW do you still have the 95 transmission and is it 4x4 if so I will take right now

Can you swap tail shafts from a two wheel drive trans to a 4x4 trans and make it work ? I have a 4l60E out of a 99 Tahoe that’s 2 wheel drive and mines four wheel drive .

I have a 1995 4160e 4x4 trans that had a total rebuild on it including hard parts has less than 200 miles on it. Im parting out the truck as itonly fits a few years prior to obd2 it has the 1 piece case

Jeffpoisson how much for that transmission? And where is it located?

Do you still have the 95 4x4 transmission?I'm interested

@jeffpoisson still have that 95 4x4 4l60e?

I need a 4L60e tranny for a 97 Chevy z71 5.7 4x4 xcab I'm in Ontario oregon

I still have a 97 4x4 4l60e with tcase in salem ohio. Trans needs rebuilt lost 3&4 200 for both

I need a 1995 2wd auto Trans in va let me know

In need of a transfer case, What all years will fit and wor ?, I have a 1995 k1500 with a 5.7 liter, 6 spd auto,

no ... 95 is the only year that is NOT interchangeable do to the valve body, spacer plate and solenoids