Ford Ranger Questions Maintenance & Repair
I Have A 1992 Ford Ranger Xlt 2.9L 5sp Standard. Gears 1-3 Are Fine. Howeve...
why am i losing power, speed, and problems accelerating past 3rd gear?
Crank Bearing
i got a 289 in a 84 ranger i think i spun a bearing, but not sure. I took all belts off and cranked motor. IT sounded like a really loud sqweeling. Is this somthing i should pull the motor and investi...
How Do I Remove The Hydraulic Clutch Line From The Tranny
The question is how do i remove the hydraulic line from the tranny
Can You Send Me The Firing Order
I have the firing order wrong is the firing order 1-4 from the back or the front
4wd 99 Ranger Alignment Issues.
Trying to get front wheels aligned,have replaced lower dr. side ball joint but now have to install a set of camber adusters to the upper control arm, please help so i don't end up ruining parts just r...
Firing
i hav a 88 ranger motor turnsover good but wont go fixed the gas line which thougt was the problem and i need to no what could b neother possible soultions
Is The Fuel Injection System Sequential Multiport (one Injector Sprays At A...
I have a 2.9 L fuel injected engine and I need to know if all the fuel injectors should spray simultanous or one at a time. Also am getting gas in my oil.....what could be the problem?
How Do You Change The Clutch
How is the clutch changed
STARTER DIAGRAM
I NEED A DIAGRAM FOR THE STARTER TO SE IF THERE IS ANY SPACERS OR ANYTHING
How Do You Change The Clutch.
My clutch went out on my 91 ford ranger. Its a 2.9 liter motor and I neeed to know how th change the clutch.
Vacume Lines
can you send me the scamatics for the vacum lines
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.