I got a replacement reverse light switch and it worked for a couple weeks but then the Fuze blew for the reverse lights. So I replaced the Fuze and now it blows when I put it in reverse everytime?

I got a replacement reverse light switch and it worked for a couple weeks but then the Fuze blew for the reverse lights. So I replaced the Fuze and now it blows when I put it in reverse everytime? 3 Answers

I have a 1990 ford ranger 4x4 2.9 liter v6. It had set for a couple years and i got it and i have put everything fuel related on it new! And now i can drive it until it gets warmed up good and it will 6 Answers

It will die on me after its warmed up good and will turn over but wont start but i can let it set for a while and it will start up and do the same thing.(oil pressure hand jumps around) i was thin...

i have a 1990 ford ranger 2.3 liter the 8 spark plug and it will start up fine then i will drive it for about 5 mins and then it will run bad 4 Answers

1990 ford ranger 2.3 liter the 8 spark plug and it will start up fine then i will drive it for about 5 mins and then it will go to spitting and sputtering and backfiring and when you give it gas it ...

2006 Ranger when I open the door all interior lights come on and when I first put the key in the ignition I get dash light but as soon as I turn the key in the igintion I hear a click and all goes dea 1 Answer

Have interior light when I open the door and when I put the key in the ignition at 1st turn I have dash lights but as soon as I turn the key all the way to start I hear a click and all goes dead. No c...

Clutch .. I have rebuilt tyranny new slave cylinderder clutch basically the works when I am in motion and in any gear and push I the clutch it makes a grinding vibrating sound but if I put neutra 1 Answer

It goes away what could it be?