Have a 2000 ford ranger 3.0 just replaced the starter and had the battery checked both are good. When I turn the ignition on the starter runs but the engine does not crank over. Please help? Thanks

Have a 2000 ford ranger 3.0 just replaced the starter and had the battery checked both are good. When I turn the ignition on the starter runs but the engine does not crank over. Please help? Thanks 1 Answer

My 2000 ford ranger has power to the key but won't turn over. Judging me hot and the negative wire on the starter will turn it over but it's like it has no gas to start 1 Answer

Why will my truck not turn over when I have a good battery

i have a 1989 ford ranger 2.3L engine and manual 5 speed trans. my truck will not idle as long as the alternator is plugged in but idles and runs fine with it unplugged 2 Answers

i have replaced the alternator, the voltage regulator connecter plug, the battery, the cylanoid,the crank sensor, put a new timing kit on it, and replaced the fuel pump and fuel filter but my truck st...

Turn the key but no starter relay 2 Answers

Hi! My english is bad, but sometimes you can help me. I have a 1996 ranger 4.0 and when I turn the key will not start. I already test all fuse. they are ok. But not electric current arriving on star...

my 2008 ford ranger won't start. i replaced the battery and it just clicks when i try to start it 6 Answers

my 2008 ford ranger won't start. i replaced the battery and it still won't start.it just clicks when i turn the ignition on