Keyless entry

Look in the owners manual and the other literature that came with the car.

Try this see if it works: "Displaying the Factory Set Code Note: You will need to have two programmed passive anti-theft keys for this procedure.To display the factory-set code in the information display: 1. Insert a key into the ignition and switch the ignition on for a few seconds. 2. Switch the ignition off and remove the key. 3. Insert the second key into the ignition and switch the ignition on. The factory-set code will display for a few seconds. Note: The code may not display until after any other warning messages first display. With Intelligent Access Keys Note: You will need to have two programmed intelligent access keys for this procedure.

Check in your glove compartment, in fuse box and in the owners folder if you got one with the car. It is usually on a small card.