where is the engine coolant temperature sensor located

its in the front of the engine ...here is the procedure...the pic is not the greatest 5.7L/6.1L Labor Operations: Click to display a list of Labor Operations associated with this procedure 1. Partially drain the cooling system (Refer to 07 - Cooling - Standard Procedure) . 2. Remove accessory drive belt (Refer to 07 - Cooling/Accessory Drive/BELT, Serpentine - Removal) . 3. Carefully unbolt air conditioning compressor from front of engine. Do not disconnect any A/C hoses from compressor. Temporarily support compressor to gain access to ECT sensor (3). 4. Disconnect electrical connector (2) from sensor (3). 5. Remove sensor (3) from cylinder block.

The AC compressor is not on top of 2006 Dodge Charger RT 5-7l it is on the bottom. You have enough access without removing anything but the engine beauty cover.

Where is the cooling sensor on 2009 Dodge avenger 3.5

Here is a helpful video I found, this guy goes in depth and show you where & how to replace that sensor. Hope this helps https://www.youtube.com/watch?v=sNCrU3KjZOw

2008 5.7 ram 1500, it appears to be on the block behind the water pump on left. Nothing under ac compressor. The only other one is the oil one beliw above oil filter. But i I cannot be 100% sure on this.. Anyone???