how do i calibrate sunroof

After you close the roof, Push up on the switch (which opens the rear of the roof ) Then slide the switch forward to close the rear. This will enable the roof to completely close the front & seal it. If you slide the shade back you will see a slight gap between the roof & the sunroof. This gap occurs when you close the roof from any open position. When the roof is closed, push up on the switch, then close it. The gap in the front between the roof of the car and the sunroof will not be there.

Credit for this sunroof fix goes to user 4blazecordell from the following Endeavor thread from 2 years ago. Can confirm: Works. I had no idea the slider switch has a push to raise function. https://www.cargurus.com/Cars/Discussion-c9131_ds522564