2008 silverado 1500 4wd problems
So my rear drive shaft came out while driving, not
out of the transmission but from the rear yoke, I
removed the drive shaft and put it into 4wd. I
plugged the transmission so not to lose
transmission fluid. A few miles down the road my
4wd stops working and I'm stranded. 300 bucks
later and another 150 for a new rear drive shaft I
thought I was in the clear. Not so much, I have the
service 4wd on the dash and cant get it to go out
of 4wd. Regardless of where I have the dial set, the
truck will go from 4wd hi and 4wd low while the
dial is set to 2wd. I replaced the actuator hopi g to
solve this with no luck. Anyone know what could
be going on?
