Cranks but won’t start up
Driving doing 70mph car cuts off won’t start back
up. B20b1 engine swap with a b18b1 trans swap.
Replaced the coil pack the rotor wheel in th dizzy
and the ecu. Still won’t start, I have no spark.
Checked the all the fuzes and none blown checked
all the grounds and it’s all right. Car only cranks
and won’t turn over. Please help me 1996 Acura
Integra
I have exact same problem, I have a 2000 Acura Integra and after having issues with my head gasket and then the original engine stopped running I swapped out to another B18 and drove the parts car to my shop and proceeded to swap motors, so I know for a fact that it should run. Now here I am 3 months later and Nothing! Trouble codes are P0118 & P0113 which are both affiliated with the ECT, so I am going to try that an hopefully we have an answer... If not I might have an Acura for sale
Did you ever find an answer? I have 2000 Acura Integra with spark, fuel sparying at filter when I unscrew nut and turn key to on position, timing belt in check. compression of 120 psi on all four heads. What could it be?