Chrysler Town and Country code P0508, low or poor circuit!
I have a 2006 Chrysler Town and Country 3.3L. My engine stops always
when the gas pedal is released to idle. If I push the gas a little bit down the
engine runs but as soon as I release the gas the engine stops! On the
other hand if I push the gas so that the RPM is about 3000 then the engine
speed fluctuates down and up and does not let the RPM go normally up.
What could cause these problems? I have cleaned the Idle Control Valve
and checked the Idle Position Sensor. They have no problem but I get the
code P0508 which means that the Idle Control circuit is low or poor. How
this problem can be solved?
Does anyone know?
Thanks