Can the N52 engine from a 2009 528I fit in a 2007 X5 with a N52 engine in it ?
I have a blown 3.0 N52 engine in my 2007 X5. I've found a 3.0 N52 out of a
2009 528I it has an N52 engine in it. and whats the difference.
I would ask your BMW dealer or a BMW specialist if there were any small changes that would cause a problem.
Did you or are you pullling your motor? I have one to pull and I can't find any vidoes or directions on how to pull it. Does it have to come out the bottom or can it come out the top/front?
I have a blown 3.0 N52 engine in my 2007 X5. I've found a 3.0 N52 out of a 2009 528I it has an N52 engine in it. and whats the difference.
2007 BMW X5 3.0si AWD
-
Maintenance & Repair
Hi, I have a 2007 x5, 3.0. It currently has 66246 kilometers on it. While I was driving all the electric components including the odometer, display screen, audio completely shut down. I pulled over t...
2007 BMW X5 3.0si AWD
-
Maintenance & Repair
i have a 2005 bmw x5 3.0, in the morning i drove about 2 miles. after a little while I started the car but wasnt even a cranking sound, then i jump start it and drove about a mile to get home. i sto...
2005 BMW X5 3.0i AWD
-
Maintenance & Repair
I need to check the fuel pressure on my 2001 BMW X5 4.4i. I think it is supposed to be between 45 - 50 psi. I do not know where to connect the fuel pressure gauge. I replaced the fuel filter but it ...
2001 BMW X5 4.4i AWD
-
Maintenance & Repair
I DONT KNOW WHER THE WATER IS COMING FROM IN FRONT FLOOR & I CAN HEAR IT & GETTING THE FLOOR WET
BMW X5
-
Maintenance & Repair
Content submitted by Users is not endorsed by CarGurus, does not express the opinions of CarGurus, and should not be considered reviewed, screened, or approved by CarGurus. Please refer to CarGurus Terms of Use. Content will be removed if CarGurus becomes aware that it violates our policies.