Does the 2004 ram 4.7lt have a master ignition coil or something? the reason I ask is that I am installing a flame thrower kit and I need to find the ground wire leading to it.

Does the 2004 ram 4.7lt have a master ignition coil or something? the reason I ask is that I am installing a flame thrower kit and I need to find the ground wire leading to it. 1 Answer

Is it possible to install a flame thrower exaust on a fuel injected motor ? 2 Answers

I have just purchased a flame thrower kit for my 2005 Dodge Ram 1500 and was wondering how hard it is to hook up on a fuel injected motor. I am also installing 4" exaust stacks behind the cab hoping i...

I am wanting to replace the 4.7L Magnum in my 2004 Ram 1500 VIN N with a performance engine. I am not looking to race. I also want something that will install with as little mod as possible. Ideas? 9 Answers

My plan is to install the new motor and then add a performance intake and flowmaster dual exhaust. I want that throaty growl when i get on it.

Where can I find the coil pak on my 2005 Dodge ram 2 Answers

I am installing a Autometer tach in my 2005 Dodge Ram 1500 with a Autometer tach adapter. The directions say to hook into the positive wire out of the coil pak. Being an old school hot rodder I need t...

I was putting a new radio into my 03 Ram 1500 and just to make sure the radio worked in it.I must have not protected a couple of the wires all the way and a couple of the wires touched on the back of the radio. after the fact, the courtesy light wont come on when opening the door, and Pretty much all the functions that a vehicle is supposed to perform without turning on the vehicle don't work. and neither does the radio when I hook it up. Yes, i checked all the fuses in my fuse box. I even wen to the point of replacing all of the, even the ones that i thought had nothing to do with the situation. the radio still works because i checked it by putting power to it by directly putting it to the battery. and the fuse didn't pop in the back of the radio when all this happened. so at this point I'm completely lost. Any help with this would be much appreciated. 1 Answer

Putting in a new radio, a hot touched something and now nothing works.