No spark from coil on 94 F150 xlt
Asked by ajfisherman Aug 10, 2014 at 11:34 PM about the 1994 Ford F-150 XLT 4WD SB
Question type: Maintenance & Repair
Ok i just put my engine back together after
a few months of work. Now I'm not getting
any spark from coil. I replaced coil,wires,
tested the ICM, and i have power going into
the coil but no spark. I'm at a loss
7 Answers
sounds like a bad coil or you missed a ground some where
ajfisherman answered 10 years ago
I did a light test last night and no power to the coil but everything else has power and everything is hooked up.I've replaced the coil twice just to be sure.
Check the ignition control module it's mounted on the inside fender at the back on drivers side . Make sure the 2 wires at coil connector is tight .
ajfisherman answered 10 years ago
Tested the Ignition control module at auto zone 3times, replaced the connector as well
ajfisherman answered 10 years ago
Thanks for all the help,i got her runnin. It was a blown fuse in the power distributor box
What fuse was it cause I have the same truck and the same problem.