I have 2006 manual Trans cobalt had the clutch replaced drove fine for 2 weeks clutch peel went to floor bleed it car will start feels like I can put in gear but won't move

I have 2006 manual Trans cobalt had the clutch replaced drove fine for 2 weeks clutch peel went to floor bleed it car will start feels like I can put in gear but won't move 1 Answer

My 2007 cobalt lt idles rough, but if I put it in neutral the vibration stops. Also, sometimes while driving it feels like I have a complete loss of power and my car will sputter/stall briefly. 3 Answers

2007 Chevy Cobalt LT, Automatic Transmission, 137k miles. New brakes and rotors - so that's not the problem.

I have 2008 chevy cobalt i bought used...ive had it for 2 months. I had the recalls done. My problem is that car stalls when coming to a stop and also my rpm and speedometer move up and down.... 1 Answer

I have replaced the throttle body sensor and the mass airflow sensor and now it idles high....and gauges rpm and speedometer move up and while park

I need help with my 2006 Chevy Cobalt? Why won't it start? 3 Answers

I have a 2006 Chevy Cobalt, at first it was over heating due to a bad water pump and radiator so I replaced them. Now ever since I replaced those parts my car won't start. It cranks but the car won'...

I have a 2008 Chevy Cobalt and I have put new brakes and rotors on this car 2 months ago and just this past Saturday I put in a new wheel hub bearing on passenger front. And when I go to get on my brakes it has that dragging sound like brakes against rotors, like bad brakes. Very confused...any ideas? 15 Answers

Put new brakes and rotors on both front 2 months ago, front end alignment and new tires less than six weeks ago. New wheel hub bearing with abs on passenger front. Stopped the whining while driving ...