Rear turn signal not working, replaced bulb and still nothing?
Asked by tlmelhem Jan 14, 2015 at 04:03 PM about the Chrysler Sebring
Question type: Maintenance & Repair
I have a 2005 Sebring convertible with 2.7 liter engine. About a week ago my right turn signal started flashing quickly, so of course I assumed it was a bulb issue. It is the rear right that won't turn on, so I replaced the bulb....still flashing and turn signal not working. So to ensure that the bulb I purchased was good I tired it in the left side and it works fine. So not sure if I have a short or some other problem I'm overlooking. Thank in advance.
6 Answers
is it just the rear or the front an checked the fused rear have u
It's just the rear turn signal, the front works but is flashing quickly.
Are the rear turn signals separately fused from the front?
same question as above, right rear turn signal does not work , front blinks rapidly, its not the bulb. left signal works fine. any ideas?
Did you ever get a solution to this problem, My 04 Sebring conv. Is doing the exact sake thing. No power to the bulb. I have no power at the bulb.
My mechanic diagnosed the condition as the socket was no longer grounded. Had to weld the ground wire to the frame, now works fine.
