What happens when you put a 5.7 crank case position sensor in a 4.3 motor?

What happens when you put a 5.7 crank case position sensor in a 4.3 motor? 1 Answer

I have a 1999 s10 blazer 4.3 the motor blew up and I put a 2001 4.3 I back in but the knock sensor are different what can I do ? 3 Answers

I have 1999 s10 blazer 4.3 blew up I put a 2001 4.3 back in the knock sensor are different what can I do ??

i have a 1990 chevy blazer 4.3 liter motor the steering wheel shakes when you are driving, also while driving the hesitate 1 Answer

i have a 1990 chevy blazer 4.3 liter motor the steering wheel shakes when you are driving, also while driving the car hesitate

where is crank position sensor 5 Answers

got a 96 chevy blazer w/4x4. looking for the location of the crank position sensor. it was turnin, but not turning over. i replaced fuel pump. still had problem, now I'm told it's the crank positi...

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control module. We coming to a stop sign it will stall and sometimes when just sitting still. Sometimes it will start right back up and other times it takes several tries. I also have the oxygen sensor on order and it should be here tomorrow. Fuel pressure tested perfectly. No black smoke, no smell of rotten eggs or the cat glowing red. The only code that comes up is PO420. 4 Answers

I have a 1999 Chevy Blazer, 4x4, 4.3 vortec. We have changed the coil pack, fuel filter, distributor cap and button, the crank shaft sensor, cam sensor and plug wires as well as the ignition control m...