is there anytime i should take out all fluids and replace them

is there anytime i should take out all fluids and replace them 1 Answer

how do I take the ignition out to replace it 2 Answers

I have to remove the ignition key cylinder mechinism

i need to find out what my cheapest route would be in fixing my transmission it says its the shift syanoid but i replace both of them and still does not solve the problem 2 Answers

it is slow ti get moving and wont shift up to a higher gear fluid was fine but before i changed the syanoids it did the exact opposite and the 1 gear would not work i just dont want to replace my...

How can I get the front axles out the hub bearing assembly, I've removed the axle nut and rented a hub puller and applied heat to it, but it is seized in there and will not come out. 3 Answers

Iv'e removed the axle nut, attached the hub puller, and applied heat to it, also I hit on it with a 3lb. hammer, this thing is seized in there and wont come out. I need it out so I can get to the lo...

I have been told that since my 2003 chevy blazer has over 100,000 miles that i should drain all my fluids and have them replaced and that it will cost me $290. is that something that i should do and i 1 Answer