Where do you plug in the OBD scanner?
9 Answers
StudentOfTheWrench answered 9 years ago
What year Camry are you interested in? If it's a generation 4 (1997-2001) it is directly underneath the steering column at the front edge of the dash. Just look underneath where the column meets the dash and it's there. Other generations are in different places. I believe the generation 3 (1992-1996) have it behind the coin tray on the left side of the dash. The tray is easy to remove. If it's more recent, there are lots of video on YouTube to show you how to find the OBDII connector. I hope that helps.
migration_Lastchance... answered 9 years ago
A 1995 Toyota Camry may be an OBD I vehicle. Check the EMISSION LABLE under the hood of the vehicle. It should indicate either indicate OBD I or OBD II Compliant. Get back to us with this info.
StudentOfTheWrench answered 9 years ago
Now I see the listing for the car type.. ODBII became the standard in 1996, but there are late model 1995 Camry that got the ODBII interface. Everything depends on whether you have the 4 or 6 cylinder model and when it was made. But it does confirm that the connector is behind your coin tray on the left hand side of the dash. Open the tray, then an easy push up and pull motion that gets the tray out. Just be gentle, the clip is pretty fragile especially as they get harder with age.
I cant find obd plug for 1994 toyota camry
Same as me right now working on mine... so, it's Under the dash, slight left if the steering column (as if sitting in driver seat looking at the wheel) lol, some question... n it's odb 1... good luck
In my 1995 Camry it is on the passenger side under the hood. near the back corner, as you face the car window. It is in a rectangular box with a cover that swings up upon pressure being applied. According to the directions in my OBDI tool package, a tool is needed to get the codes for the 1995 Camry.
RandomOldDude answered 5 years ago
https://troubleshootmyvehicle.com/toyota/2.2L/retrieving-trouble-codes-1 This applies for the rectangular box on the strut tower too. All you need is a jumper wire or paper clip. Oh and good eyesight helps!
Where do you find a OBD port on a 1990 Toyota Camry
