My child is outside of Atlanta and check engine light was read out at an Autozone, said it was the camshaft sensor , just drive home to Charleston SC and repair it tomorrow. Will that be ok?

My child is outside of Atlanta and check engine light was read out at an Autozone, said it was the camshaft sensor , just drive home to Charleston SC and repair it tomorrow. Will that be ok? 1 Answer

I have had my check engine light on for a couple of years now. The code was the bank 1 sensor 2 O2 sensor. I have replaced it twice and all the others. Light will not reset at all. What do I do? 6 Answers

I have tried code checkers from autozone, o'reilly's, and my own. I have disconnected the battery and still nothing. The remote start will work and the truck runs for exactly 8 seconds every time I ...

My o/d light was coming on and then the trans temp light. I replaced the cooler intake line to get rid of that check valve and reset the computer. All was fine until i took it on the highway at 60 mph 1 Answer

After about 15 miles, the o/d off light came back on and it kicked itself out of overdrive. Temp light didnt come back on. Got home, turned the truck off, turned it back on, and light was off. Is ...

i have a 2002 dodge 1500, 4.7. It will crank but not start, replaced the CAMshaft and crankshaft senors, replace all plugs, fuel tested ok, we can here the fuel pump engage, we have spark and that last thing we just did was changed all the timing chains (it was out of timing) but the truck still will not start. Help on what could be next? Thanks 42 Answers

2002 dodge 1500 4.7 cranks will not start.

98 Dodge Ram 1500 5.9L V8 Mag. so i drove it the other morning and then was messing with Therm sensor and something shorted out. Now my check engine, trans temp and overdrive off light are on. It turns over but not starting, replaced the fuel relay and crank position sensor. Still will not start, could it be the PCM/ECU? someone please help.... 6 Answers

IS IT A BAD PCM/ECU?