tacho meter not woking
Asked by stolenrb26nissan Oct 19, 2022 at 06:01 AM about the 1995 Ford Bantam
Question type: Maintenance & Repair
1 Answer
Check the wiring harness between the PCM and cluster, Perform an instumentcluster self test to isolate wher the problem could be. Cluster Self Test To activate the Cluster self Test for Bantam , Fiesta and Ikon : Switch the ignition to OFF and press the ODO trip button IN and hold, then switch the ignition ON and wait till the ODO display, displays TEST. The Gauges will go to full sweep and back. Press the ODO trip button again to go to the next test. Carry on through the tests. To exit the self test , switch off the ignition