Year
Used 1999 Honda Civic CX Hatchback for Sale Nationwide
9,375 results
About Honda Civic CX Hatchback
4.4 Overall rating
Filter by rating
Rafael T
Reviewed a 1999 Honda CX Hatchback on Feb 6, 2009
I've been the owner of this car for a little over a year now, and I must say it is a pretty neat car to drive. The d16y7 motor only puts out around 107hp stock, but with the upgrades I have, I'd say it's more around 125-130. Since the car is so light, with no power steering or air conditioning to slow it down, it accelerates is quite good, as well as the braking. The handling is good as well with the Tein lowering spring i put in. The car looks great too, with the HIDs and 15inch rims. You can't go wrong with the gas mileage either. It takes about 20 dollars to fill my tank, depending on the price of gas of course. It's an overall fun car to drive, and I would recommend it if you get one in good condition.
Michał D
Reviewed a 1999 Honda CX Hatchback on Oct 9, 2009
20k miles done in a year with just an oil/brake pads/wipers change. No brakedowns or other surprises. Just went through NCT (Irish National Car Test - has to be done every 2 years) recently without any problems. All it costs me is petrol really, and it's not a lot neither because it needs around 7.7l for 100km (30.5mpg). Acceleration is not bad, could be better of course, but as for 1.4l engine (90HP) it's really fine. Handling is brilliant as for this class of car. I love driving it, after a year it's still fun!
Anonymous
Reviewed a 1999 Honda CX Hatchback on Dec 26, 2007
great car would def recomend brilliant handeling, sticks to the road n v-t.e.c roars
Milo E
Reviewed a 1999 Honda CX Hatchback on May 18, 2010
It's been coverted i smashed my 00 sir sedan and here is the finish of what was just a shell it has all the wireing and interior out of it got power everthing and found a gsr block and then a ls crank left the squirters in for the rv and made it bullit prof next is the him joints for the tracking bars they have to be welded since all the drive train is sir tube lowers upfront! it has 94,000 on the hatch original and 96,000 on the si parts before the build up, it has a fully ported head 60,000 thin wall and for now itr cam's and a center force clutch with a 8 pound findasa flywheel arp studs through out the motor to keep it togther!









